;
1/4

Automotive Friction Market

We share in depth knowledge about trends and developments in the automotive friction market.

Our thinking about automotive trends and the friction industry

At Lapinus, we are dedicated to provide solutions that will enable everybody to improve the future. Within the global automotive industry we identify trends and challenges driving the development of tomorrows' products. Here we publish our learnings and insights.

20230629 RW-LF PHO 798
Thought Leadership

How will the introduction of Euro 7 influence the Passenger Car Disc Pad?

How will the introduction of Euro 7 influence the Passenger Car Disc Pad?

20200407 RW-LF PHO 323
Friction

Reducing squeal from automotive brakes

Brake squeal is often classed under ‘automotive comfort’, and noisy brakes can indeed make driving uncomfortable. Squeal is much more important than that, though, since it can mask real problems.

20201211 RW-LF PHO 497
Thought Leadership

Commercial developments in automotive braking

This article discusses the increased take-up of Electric and Hybrid Vehicles and what this means to manufacturers of cars, brake systems and brake pads.

20200408 RW-LF PHO 328
Sustainability & Circularity

Formulating car brake pads

Over 500 raw materials are used in today’s automotive brake pads, with a typical compounder’s formulation containing up to 30 separate components. This complex mix of raw materials is needed to cope with the extreme stresses and conditions that brake pads experience.

20200407 RW-LF PHO 318
Sustainability & Circularity

The disc brake pad underlayer

Most brake pads of cars and commercial vehicles have an underlayer between the friction material and steel backplate. This underlayer ensures good bonding strength with the backplate, dampens vibration and noise generated in the braking system, and gives a thermal and moisture barrier. And, depending on the raw materials used in the underlayer, it may save costs.

20200615 RW-LF PHO 341
Friction

Standardization of passenger car disc pads

With the automotive market changing rapidly to keep up with customer demand and technology developments, the heat is on for the brake pad business.

20200514 RW-LF PHO 337
Friction

Friction Products in China – an OE Market Perspective

Our new blog gives an overview of China’s automotive market, and summarizes Original Equipment brake pad developments.

20200423 RW-LF PHO 329
Friction

Passenger Car Brake Pad (PCDP) Market Developments

The fourth in our series of blogs discusses the market for Original Equipment and Aftermarket brake pads.

20200226 RW-LF PHO 304
Friction

Trends in non-exhaust emissions of particulate matter

The third in our series of blogs discusses road transport emissions, and how brake emissions contribute.

20200212 RW-LF PHO 300
Friction

Consistent material quality is important for brake manufacturers

The importance of consistent materials quality for brake – and car – manufacturers

20180810 RW-LF PHO 69
Friction

Automotive braking trends – the inside track

This is the first of a series of blogs highlighting the most important trends facing the manufacturers of cars, brake systems and brake pads.

20190918 RW-LF PHO 298
Friction

Trends in automotive braking

With the automotive industry changing fast, what trends will brake pads, brake systems and car manufacturers see over the next few years? - Mark Segeren

20180911 RW-LF PHO 175
Friction

White mineral fibres

Innovative white mineral fibres for reduced dust emissions in friction applications

More information

How can we help you?

Downloads

Downloads

Contact us

Read more

Events

Read more

We develop innovative products used in a wide range of applications, including automotive friction, urban climate adaptation, urban acoustics, gaskets and coatings.

Lapinus